OPTI-974 Slow Thinner / Retarder - Quart
Superior adhesion to Special Performance Polyurethane, Polyamide, Polyester, Latex, Leather
High-resistant to dry cleaning chemicals and heat
Excellent flexibility (55D) and Resolution, Durable Mar Resistant for exposure
In compliance with California Prop. 65 and RoHs
Rubber, Leather, Cotton Denim, Canvas
66000 Series screen ink is formulated with exceptionally high level of adhesion to hard to print substrates of a wide variety of treated and untreated Polyurethane, and others.
66000 Series is a built-in catalyzed single package system, ready to use straight from the container.
Note: Pre-test on actual substrate before any full production run.
FINISH: smooth .flexible.
Scuff resistant, gloss finish.
COLORS: Available in opaque and transparent colors.
COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester.
SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester.
Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent.
Also, any solvent-resistant film or photo emulsion.
DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jetdry in 20 to 30 seconds at 135° to 180° F (37°C to 83°C).
To extend color and/or reduce pigmentation, add 66928 Match Base. For printing fine details, add 66PC850 Halftone Base.
To improve ink flow, add 1/2%-1 % (by weight) FA 011 Flow Agent.
For best printing results, 66000 Series should be reduced 5-10% (by weight) with T-976.
To prevent ink drying under hot, humid conditions, add 3-5% (by weight) T-922 or T-974 (use sparingly).
QUICK GUIDE FOR INK MODIFICATION
T-922 3- 5%
T-974 3- 5%
FA-011 1/2 to 1%
(All mixing proportions by weight.)
T-902 or T925 Wash-up
SC-500 Bio. Wash-up
SC-510 Instant Bio. Wash-up
1-quart (0.945 Liter),
1-gallon (3.78 Liter), containers.
|Brands||Optima Performance Series|
|Thinner Type||Slow Thinner / Retarder|