Stretchable Plastisol Ink - Quart - Stretch Additive
Stretchable Plastisol Ink
- Outstanding flexibility and film strength.
- Superior adhesion to Spandex & other fabrics.
- Excellent Adhesion as foil adhesive.
- Excellent Opacity on dark color backgrounds.
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)
Cotton, 50/50 cotton/polyester blends, and some synthetics.
Stretchable Plastisol Ink/PF-ST Series is popularized with its consistent high-elongation print results on dark and light colored textiles. It is a formulation compatible to most plastisol additives for quick and easy modification in many textile applications.
Stretchable Plastisol Ink/PF-ST Series is ready to use straight from the container or can be extended up to 50% for light color applications.
Note: Stretchable Plastisol Ink/PF-ST Series colors do not contain bleed inhibitors. When Bleed Resistance is the utmost concern, Use PF-STBR Series.
Note: Pre-test on actual substrate before any full production run, for adhesion, wash fastness and other desired effects.
Durable, soft-hand finish.
Available low-bleed opaque colors; formulated using non leaded pigments.
Mesh counts up to 355 monofilament polyester (142T European Mesh).
Dual Cure sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent.
Heat-cure at approximately 320°F (160°C) for 1 to 2 minutes. Will not air-dry.
To reduce ink viscosity with RE703 or RE704, add 1- 5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE705 can be added up 10 to 20% (by weight of ink) if color shade is not crucial.
When printing textiles, use a medium/hard (65-75 Durometer) squeegee.
Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings.
1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers.
SAFETY & HANDLING:
Refer to Material Safety Date Sheet (MSDS) for complete information.
WASH UP SOLVENT:
T-125 Wash up or equivalent / SC-500 Bio. Wash-up / SC-510 Instant Bio.Wash- up. (Non-Petrochemical)
PF-ST081 – Clear Extender Base / RE 703 – Quick Flash Reducer / RE 704 – Clear Reducer / RE 705 – Curable Reducer
All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!
|Brands||Total Ink Solutions|