Superior adhesion to a wide variety of Glass, Metal and Rubber.
UV-5000 Series Multi-Purpose Ink
- Superior adhesion to a wide variety of Glass, Metal and Rubber
- Fast curing formulation allows high speed production
- High resistance to chemicals, scuffing or marring
- Designed for Indoor Purpose
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>
STOCK, END USE:
ABS, Polystyrene, Glass, Metal and Rubber
DESCRIPTION:
UV-5000 Series Multi-Purpose Ink is a high quality, UV ink used in printing most glass, metal, rubber and some plastic substrates.
UV-5000 Series Multi-Purpose Ink is a One part system, ready to use straight from the container.
Note: Pre test on actual substrate before any full production run.
FINISH:
High gloss.
COLORS:
Available in opaque and transparent colors. All colors are formulated with non-leaded pigments.
COVERAGE:
Approximately 3,000 square feet (363m2) per gallon.
FLEXIBILITY:
Not applicable.
SCREEN FABRIC:
Mesh counts 355-390 (139T-153T/cm European) monofilament polyester for most applications. Use mesh count 305 (122T European) when printing with fine metallic powders.
STENCIL:
Dual cure direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion.
CURE:
UV curing required. Use one or more 200 or 300 , 600 watt mercury vapor lamp
MODIFICATION:
To extend color and/or reduce pigmentation, add UV-5790 Clear Base. For printing fine lines and 4 color process halftones, add UV-5800 Halftone Base. To improve ink flow, add 1 % to 2% (by weight of ink) FA-01 Flow Agent. To reduce ink’s viscosity, add approximately 2 to 8% (by weight of ink) UV-RE100
PACKAGING:
1-quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters).
SAFETY & HANDLING:
Refer to Material Safety Data Sheet (MSDS) for complete information.
CLEAN UP SOLVENTS:
T-902/925 Lacquer Wash-up / T-911 Vinyl Wash-up / SC-500 Biodegradable Wash-up / SC-510 Biodegradable Wash-up (Soybean and Corn Ester based)
MODIFIERS:
UV-5790 Clear Base / UV-5800 Halftone Base / FA-016 Flow Agent / UV-RE100 Reducer