WE ARE OPENTotal Ink Solutions COVID -19 Response.. PLEASE READCLICK HERE

UV-5000 Series Multi-Purpose Ink - Gallon

$328.73 153.88

In stock

UV-5000 Series UV CURABLE INK

  • Superior adhesion to a wide variety of Glass, Metal and Rubber
  • Fast curing formulation allows high speed production
  • High resistance to chemicals, scuffing or marring
  • Designed for Indoor Purpose

In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)

Superior adhesion to a wide variety of Glass, Metal and Rubber.

UV-5000 Series Multi-Purpose Ink

  • Superior adhesion to a wide variety of Glass, Metal and Rubber
  • Fast curing formulation allows high speed production
  • High resistance to chemicals, scuffing or marring
  • Designed for Indoor Purpose

In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

STOCK, END USE:

ABS, Polystyrene, Glass, Metal and Rubber

DESCRIPTION:

UV-5000 Series Multi-Purpose Ink is a high quality, UV ink used in printing most glass, metal, rubber and some plastic substrates.

UV-5000 Series Multi-Purpose Ink is a One part system, ready to use straight from the container.

Note: Pre test on actual substrate before any full production run.

FINISH:

High gloss.

COLORS:

Available in opaque and transparent colors. All colors are formulated with non-leaded pigments.

COVERAGE:

Approximately 3,000 square feet (363m2) per gallon.

FLEXIBILITY:

Not applicable.

SCREEN FABRIC:

Mesh counts 355-390 (139T-153T/cm European) monofilament polyester for most applications. Use mesh count 305 (122T European) when printing with fine metallic powders.

STENCIL:

Dual cure direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion.

CURE:

UV curing required. Use one or more 200 or 300 , 600 watt mercury vapor lamp

MODIFICATION:

To extend color and/or reduce pigmentation, add UV-5790 Clear Base. For printing fine lines and 4 color process halftones, add UV-5800 Halftone Base. To improve ink flow, add 1 % to 2% (by weight of ink) FA-01 Flow Agent. To reduce ink’s viscosity, add approximately 2 to 8% (by weight of ink) UV-RE100

PACKAGING:

1-quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters).

SAFETY & HANDLING:

Refer to Material Safety Data Sheet (MSDS) for complete information.

CLEAN UP SOLVENTS:

T-902/925 Lacquer Wash-up / T-911 Vinyl Wash-up / SC-500 Biodegradable Wash-up / SC-510 Biodegradable Wash-up (Soybean and Corn Ester based)

MODIFIERS:

UV-5790 Clear Base / UV-5800 Halftone Base / FA-016 Flow Agent / UV-RE100 Reducer

Brands Total Ink Solutions
Material
Shopping Cart
0
No products in the cart.