Transfer Plastisol Ink - Quart
Classic Transfer Plastisol Ink Series
Total Ink Solutions® TR Series is a phthalate free plastisol transfer ink that has extremely vibrant colors, fast flashes, fast gel curing, and great adhesion with our powder adhesive. This ink series is designed for the screen printing shop that wants to start making there own screen printed heat transfer, while using the adhesive powder to increase the adhesion level of the ink.
- Vibrant colors.
- Creamy Inks.
- Soft hand prints.
- Short flash times.
- Excellent Adhesion
50% Cotton / 50% Polyester
Screen print your image onto a hot peel plastisol ink transfer sheet. If printing multiple colors, you may want to run the transfer sheets through your dryer to pre shrink the paper before printing and flashing between colors. Print your design mirrored and in reverse when printing multiple colors. Apply transfer powder and run the transfer sheets through your dryer being careful not to fully cure the ink. Click here for the adhesive powder and transfer sheets.
Flash at 220°F (104°C) for 3 - 5 seconds and semi (gel) cure at 250°F (121°C) – 280°F (138°C). Apply transfers at 330°F (165°C) - 350°F (177°C) for 15 seconds.
Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date.
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>