SAATI PC Blue Textile Emulsion (Blue Color)
GALLON - A durable and fast photopolymer pre-sensitized emulsion. Blue in color. Requires no mixing! Exposes approximately 8 times faster than standard diazo emulsions. Perfectly resistant to plastisol inks. Resistant to water based and discharge inks when post exposed. Very easy to reclaim. Available in gallon containers.
Applications: Garment printing with plastisol ink.
Characteristics: Blue one part pure photopolymer emulsion resistant to plastisol ink, abrasion and humidity. Exposes 8X faster than typical two part emulsions features/benefits. 50% solids content and medium viscosity for fast build up and good bridging on wide range of mesh counts. No mixing required and no diazo staining of mesh Water resistant when post exposed and can be used to print water based inks and adhesives.
Directions for Use: Handle under yellow safe light or low wattage tungsten lights. Avoid exposure to daylight, quartz/halogen lamps, cool white fluorescent lamps or discharge lamps. sensitizing and mixing Emulsion is pre sensitized during production and does not require mixing.
Coating: Using a high quality scoop coater or coating through, apply one or two coats to the substrate side of the screen, followed by one or two coats on the squeegee side.
Drying & Storage: Thoroughly dry the coated screen at a maximum temperature of 104°F (40°C) in a dust free, dark or yellow light area, with the substrate side facing down to optimize stencil quality. Coated screens should be stored in a dust free, dry, safe light environment.