OPTI-999 Super Retarder
Industry standard for ABS, Acrylic ,COP, Polystyrene .Polycarbonate, and other plastics.
Excellent Printability and Resolution, Durability and Mar Resistant for exposure
Excellent for vacuum forming.
Mild-odor, formulated using only non-leaded pigments
ABS, Acrylic, Butylate, Polystyrene, Polycarbonate, COP (Cyclic Olefin Polymer). Vacuum formed plastics
10000 Series screen Ink is formulated for a wide variety of plastic printing applications.
10000 Series has excellent print quality with high opacity.
Note: Pre-test on actual substrate before any full production run.
FINISH: Scuff resistant, gloss finish.
COLORS: Available in opaque and transparent colors.
COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester.
SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester.
STENCIL: Dual-sensitized direct method photo emulsion (Optima EM- 500) or SBQ pre-sensitized photo emulsion or equivalent.
Also, any solvent-resistant film or photo emulsion.
DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jet- dry in 20 to 30 seconds at 135° to 180° F (37°C to 83°C).
To extend color and/or reduce pigmentation, add 10790 Clear Base. For printing fine details, add 10800 Halftone Base.
To improve ink flow, add 1/2%-1% (by weight) FA 011 Flow Agent
For best printing results, 10000 Series should be reduced 5-15% (by weight) with T-971.
To prevent ink drying under hot & humid conditions, add T-922 or T-980 or T-999 (use sparingly).
For Spraying Application,
Use T-690 Spraying Thinner
For removing misprint without surface damage, Use T-625
QUICK GUIDE FOR INK MODIFICATION
T-922 Biting Solvent: 2-3%
T-970B Fast Thinner: 5-15%
T-971 Slow Thinner: 5-15%
T-980/T-999 Retarder: 2-3%
FA 011 Flow Agent: 1/2% to 1%
All mixing proportions are measured by weight.
T-902 or T925 Wash-up SC-500 Bio.Wash-up SC-510 Instant Bio.Wash-up.
(Non-petrochemical) PACKAGING: 1-quart (0.945 Liter),
1- gallon (3.78 Liter), containers.
SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.