Skip to content



BFPRINT TOP/M1 (matte) thin polyurethane white films printable with solvent, eco-solvent and latex inks and are suitable for heat transfer on cotton fabrics, polyester, nylon Lycra and acrylic garments.

Very small letters and logos can be easily cut by all current cutting plotters after the printing process thanks to the self-adhesive PET film carrier; we recommend the BF MYLAR film as a transfer tape and as a protection during the heat transfer, and then remove it while hot.

  • Cotton
  • Polyester
  • Mixed
  • Cutting plotter
  • 45° Blade
  • Laser
  • Wait at least 8 hours after printing
  • Before proceeding with cutting
  • Wait 12 hours after application.
  • Application Temperature: 145°C - 295° F
  • Pressure: Medium
  • Press Time: 8 Seconds
  • Peel: Hot