Skip to content
Siser® StripFlock® Pro 12"

Siser® StripFlock® Pro 12"

by Siser
Starting at $9.99 per yard
SKU SFP12P5001-1
Yards Price Per Yard
1 $9.99
5 $9.60
10 $8.90
25 $8.16
50 $7.44

StripFlock® Pro

StripFlock® Pro is a textured HTV that has a suede-like feel, similarly to original StripFlock® Pro. However, this new formulation can now be applied at a lower temperature of 311°F for 15 seconds.

Additionally, StripFlock® Pro can now be peeled hot, which can significantly speed up the application process. Just like the original version, StripFlock® Pro can be layered on itself.

Siser® StripFlock® Pro will be available in 19 colors in both 12” and 15” widths. The original StripFlock® will be gradually phased out, and support will remain until stock is depleted.

StripFlock® Pro contains a small amount of PVC, but it does not contain phthalates.
This means that StripFlock® Pro is also CPSIA certified!

Compatible Materials
  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather
Cutter Settings

Cricut:

  • Blade: Standard
  • Setting: Iron-on+

Silhouette Cameo:

  • Blade: Standard, 4
  • Material: Heat Transfer, Flocked
  • Speed: 5
  • Force: 6

Brother Scan N Cut:

  • Blade: Standard, 4
  • Cut Speed: 1
  • Cut Pressure: 2
Other Cutter Settings

Roland GS/GX-24:

  • Blade: 45°
  • Gram-Force: 80-120
  • Offset: .250
  • Speed: 30 cm/s

Graphtec:

  • Blade: 45°
  • Gram-Force: 10
  • Tool: CB09+0
  • Speed: 30 cm/s

MH, SC2, LP3, and Titan 1:

  • Blade: 45°/60°
  • Gram-Force: 100-110
  • Speed: 180 cm/s
  • Blade Advancing Varies

Titan 2 & 3:

  • Blade: 45°/60°
  • Gram-Force: 100-110
  • Speed: 300mm/s
  • Blade Advancing Varies

Mimaki CG-60SR III:

  • Blade: 45°
  • Gram-Force: 110
  • Offset: 30
  • Speed: 20-30mm/s
    Application Settings

    (Home Iron)

    • Set iron dial between Cotton and Linen
    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design for 15 seconds
    • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
    • Peel carrier warm

    (Heat Press)

    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Preheat garment for 2-3 seconds
    • Apply design at 311°F/155°C
    • Use medium pressure for 15 seconds
    • Peel carrier warm (at least 10 seconds off press)
    Accessories and Laundering

    Laundering:

    • Wait 24 hours before first wash
    • Machine wash warm or cold/mild detergent
    • Do not dry clean
    • Dry on normal dryer setting

    Recommended Accessories:

    • Siser Weeder
    • Multipurpose paper or Heat transfer cover sheet
    ×





    ×