Skip to content
Siser® EasyWeed® Heat Transfer Vinyl Stretch 20"

Siser® EasyWeed® Heat Transfer Vinyl Stretch 20"

by Siser
Starting at $12.99 per yard
SKU EWS20P5001-1
Yards Price Per Yard
1 $12.99
5 $10.60
10 $10.20
25 $9.68
50 $8.82

Putting the “Performance” in Performance Wear.

Performance wear has met its match! Siser EasyWeed™ Stretch delivers all the benefits of our EasyWeed™ heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any Siser material, EasyWeed™ Stretch has an ultra-matte finish and a soft hand. EasyWeed™ Stretch is laminated onto a pressure-sensitive carrier that allows for cutting and weeding detailed designs.

Siser® EasyWeed™ Stretch is CPSIA Certified, so it's safe on garments for all ages!

Compatible Materials
  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather
  • Lycra/spandex
Cutter Settings

Cricut:

  • Blade: Standard
  • Setting: Iron-on

Silhouette Cameo:

  • Blade: Standard, 4
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 4

Brother Scan N Cut:

  • Blade: Standard, 2
  • Cut Speed: 1
  • Cut Pressure: 1
Other Cutter Settings

Roland GS/GX-24:

  • Blade: 45°
  • Gram-Force: 60-70
  • Offset: .250
  • Speed: 30 cm/s

Graphtec:

  • Blade: 45°
  • Gram-Force: 9-10
  • Tool: CB09+0
  • Speed: 30 cm/s

MH, SC2, LP3, and Titan 1:

  • Blade: 45°/60°
  • Gram-Force: 80-85
  • Speed: 300 cm/s
  • Blade Advancing Varies

Titan 2 & 3:

  • Blade: 45°/60°
  • Gram-Force: 80-85
  • Speed: 300mm/s
  • Blade Advancing Varies

Mimaki CG-60SR III:

  • Blade: 45°
  • Gram-Force: 90
  • Offset: 30
  • Speed: 20-30mm/s
    Application Settings

    (Home Iron)

    • Set iron dial between Cotton and Linen
    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with firm pressure (do not slide iron)
    • Press each section of design for 20 seconds
    • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
    • Peel carrier hot or cold

    (Heat Press)

    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Preheat garment for 2-3 seconds
    • Apply design at 320°F/160°C
    • Use firm pressure for 20 seconds
    • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
    • Peel carrier hot or cold
    Accessories and Laundering

    Laundering:

    • Wait 24 hours before first wash
    • Machine wash cold/mild detergent
    • Do not dry clean
    • Dry on normal dryer setting

    Recommended Accessories:

    • Siser Weeder
    • Multipurpose paper or Heat transfer cover sheet
    Certification
    • CPSIA Certified
      ×





      ×