Skip to content

EasyReflective™ Heat Transfer Vinyl 20"

by Siser
$20.13
SKU ER205013-1

Siser’s only pressure sensitive reflective HTV!

EasyReflective is Siser’s only reflective material with a pressure sensitive backing! This highly reflective heat transfer vinyl is constructed with glass bead technology to illuminate the darkest of conditions. EasyReflective is a truly exceptional polyurethane product due to its pressure sensitive carrier that allows you to re-stick lifting material or replace a piece that’s accidentally removed. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, or construction crew uniforms.

EasyReflective keeps you safe by being reflective AND by being CPSIA compliant! That means it’s safe for use on children’s apparel!

Features

  • Can be cut in any vinyl cutter
  • Sticky Carrier
  • Reflective Characteristics Reflect Light in the Darkest Environments
  • Applies at 305ºF
  • Warm Peel
  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Nylon

Cricut:

  • Blade: Standard
  • Setting: Iron-on

Silhouette Cameo:

  • Blade: Standard, 3
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 6

Brother Scan N Cut:

  • Blade: Standard, 2
  • Cut Speed: 1
  • Cut Pressure: 1

Roland GS/GX-24:

  • Blade: 45°
  • Gram-Force: 80-90
  • Offset: .250
  • Speed: 25-50 cm/s

Graphtec:

  • Blade: 45°
  • Gram-Force: 9-10
  • Tool: CB09+0
  • Speed: 30 cm/s

MH, SC2, LP3, and Titan 1:

  • Blade: 45°/60°
  • Gram-Force: 80-85
  • Speed: 300 cm/s
  • Blade Advancing Varies

Titan 2 & 3:

  • Blade: 45°/60°
  • Gram-Force: 60-65
  • Speed: 300mm/s
  • Blade Advancing Varies

Mimaki CG-60SR III:

  • Blade: 45°
  • Gram-Force: 90
  • Offset: 30
  • Speed: 20-30mm/s

    (Home Iron)

    • Set iron dial between Cotton and Linen
    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design for 10-15 seconds
    • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
    • Peel carrier warm

    (Heat Press)

    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Preheat garment for 2-3 seconds
    • Apply design at 305°F/150°C
    • Use medium pressure for 5-10 seconds
    • Peel carrier warm (at least 15 seconds off press)

    Laundering:

    • Wait 24 hours before first wash
    • Machine wash warm or cold/mild detergent
    • Do not dry clean
    • Dry on normal dryer setting

    Recommended Accessories:

    • Siser Weeder
    • Multipurpose paper or Heat transfer cover sheet
    • CPSIA Certified