Skip to content
Siser® EasyPatterns® Plus Glow Heat Transfer Vinyl Roll 12" x 36"

Siser® EasyPatterns® Plus Glow Heat Transfer Vinyl Roll 12" x 36"

by Siser
Starting at $21.00 per yard
SKU EPP12LIGHTNING
Yards Price Per Yard
1 $21.00
5 $19.00
10 $18.00
25 $17.00

EasyPatterns® Plus Glow Heat Transfer Vinyl

It's EasyPatterns Plus that now glow in the dark!

These Siser®  pre-printed and pre-masked patterns will "charge" under light, and glow an eerie green in the dark! Just like other  Siser® Plus designs, Siser®  EasyPatterns Plus Glow does not require a masking step. Simply cut designs mirrored carrier-side down just like any other HTV, weed away the excess material, and you're ready to apply! EasyPatterns Plus Glow is a great way to achieve glowing, patterned designs with just a single piece of HTV. However, it is not recommended to layer additional HTV on top, as EasyPatterns Plus Glow should be used as a top layer only.

Siser® EasyPatterns are CPSIA Certified so you can decorate kids' items with confidence.

Specifications

PU composition 

  • Pressure sensitive backing
  • Semi-gloss finish
  • 100 Microns/3.9 Mils
  • 45°/60° blade
Cutter Settings

Cricut:

Blade: Standard
Setting: Iron-On

Silhouette Cameo:

Blade: Standard, 3
Material: Heat Transfer, Smooth
Material: Smooth
Speed: 8
Force: 6

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s

Titan 2 & 3

Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Application Instructions:

Application Instructions (home iron)

• Mirror design and cut according to your cutter's settings
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron) for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold

Application Instructions (heat press)

• Cut material - MIRROR!
• Weed excess material
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Recommended Accessories & Care

EasyPatterns Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

Recommended Accessories:

Siser Weeder

Laundering:

Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach

×





×