SpeedTreater-TX Automatic Pretreater

The #1 Automatic Pretreatment Machine In The Industry

The choice for direct-to-garment operators who want spraying pretreatment to be easy, consistent and time saving

Works with any brand of pretreatment.

Professional Quality Pretreat Machine

No air compressor required to buy!
All electric, quiet operation
Powder coated rustproof all steel construction

Become an Expert Pretreater Overnight

If you can load a shirt, close a drawer and press a button, you'll be an expert pretreater.

Reliable & Consistent

Expertly Constructed
One year limited warranty
Easiest Maintenance

Plus

Fully contains pretreat spray
Goes right next to your D-T-G Printer
Adjustable spray volume

Start Pretreating Garments Now!

Table Top Machine
Up to 17" x 24" Spray Area
One-Year Limited Warranty

Rustproof powder coated steel cabinet
Precise Spray Length Control and More!

Why You Should Pretreat Automatically

The most important reason to use an automatic pretreater is to get the exact same amount of spray, in the exact same spot, every time you pretreat. If you spray by hand using a power sprayer, no two shirts will receive the same amount of spray. And having the proper amount of spray is critical to getting bright, washfast prints. An automatic pretreatment machine never gets tired and is always precise, leaving the perfect amount of spray every time.

The new SpeedTreater-TX Automatic Pretreatment System. With a pretreat area up to 17”x24” , the SpeedTreater-TX is one of only pretreaters available that will work to the full 16”x20” capacity of the Epson SureColor F2000 and the 13”x24” print area of the Veloci-Jet XL printer.

About the SpeedTreater-TX

Compatability

The SpeedTreater-TX works with all pretreat solution brands for every direct-to-garment printer.

Where it Sprays

Easily adjust the length of the spray using the knobs on the top of the machine. So if you only need to print on part of the shirt, just spray part of the shirt.

Right Next to your DTG Printer

The SpeedTreater-TX fully encloses the pretreat process. Because you don't get overspray outside the SpeedTreater, it can be positioned directly next to your D-T-G machine.

Speed

Pretreating a shirt takes about six seconds.

Controllable and Consistent Spray

Adjust the speed control to set the amount of pretreatment that lays down on each garment.

Maintenance

By moving the external feed hose from your pretreatment solution to a water container, you can quickly flush the hoses and nozzle clean. An easy-access rear door lets you quickly and simply remove the spray nozzle to clean it. The spray compartment can be wiped clean in just a few seconds.

Top Feature: Consistency, consistency, consistency

Using a Power Sprayer to pretreat shirts is a practiced art, and no two people in your shop will spray the same way. The SpeedTreater-TX will give you even and consistent pretreated garments... one after another, after another.

Top Feature: Pretreat in the same room, right next to your D-T-G Printer!

Pretreating can be a messy process, and when using a hand-held Power Sprayer you have to be far away from your D-T-G machine. The SpeedTreater-TX is enclosed, so it is clean and easy to operate, and pretreating can be done right next to your D-T-G machine.

Technical Specifications

Includes:

SpeedTreater-TX
17"x20" Adult Shirt Holder
Spare Nozzles
Setup Guide - PLus Additional Videos Available Online

Features:

One-Year Limited Warranty
Draw directly from your original pretreatment container
Pretreat up to 17 inches wide and up to 24 inches long, with adjustable spray length

Dimensions and Weight:

Length: 40 inch (102 cm)
Width: 24 inch (61cm)
Height: 20 inch (51cm)
Weight: 150 lbs
Shipping Weight: 218 lbs

Power Requirements

AC 110 volt - 5 amps
Just plugs into a regular outlet

1. Warranty / Support Information: The SpeedTreater-TX™ includes a one-year limited warranty on parts and labor from Equipment Zone. This warranty is valid only to the original buyer of this machine and is not transferable. Technical support by phone or email is available at no charge from Equipment Zone to the original purchaser for as long as they own the machine. Defective parts shall be replaced at no charge for a period of one year. If it is determined that the machine needs repair by a technician the machine shall be be brought to Equipment Zone or shipped in freight prepaid. The full warranty statement is available upon request.
2. Please contact us for more information.

DTG Equipment

Product FIlter

DTG Equipment

About Us

200 South Newman StreetUnit 4 & 5Hackensack, NJ 07601

Follow Us

Hours

Monday - Friday 8am - 4:30 pm EST Saturday 8:00am - 2:00pm EST

POLICIES

Report A Bug

My Account

ShowRoom

Sample Request

EDUCATION

Financing

JOIN OUR NEWSLETTER

200 South Newman Street
Unit 4 & 5
Hackensack, NJ 07601

Monday - Friday 8am - 4:30 pm EST
Saturday 8:00am - 2:00pm EST