20000 Series AIR DRY EPOXY SCREEN INK - Quart
Two Part-Ink Systems (to be initiated with catalyst)
Industry standard for electronic and industrial applications
Excellent Printability and Resolution to metal and glass
Superior abrasion and chemical resistance
In compliance with California Prop. 65 and RoHs.
Epoxy, Melamine, Metal, Glass Treated Polyethylene, Treated Polypropylene, PC Boards.
Note:20000 Series is recommended For Indoor application only
20000 Series screen Ink is formulated with high quality epoxy resins for excellent adhesion to a wide range of hard-to-print substrates. It provides outstanding solvent, chemical, and abrasion resistance. 20000 Series has excellent print quality with high opacity.
Note: Pre-test on actual substrate before any full production run.
FINISH: Scuff resistant, gloss finish.
COLORS: Available in opaque and transparent colors.
COVERAGE: Approximately 1,000 square feet (201 m2) per gallon through mesh count 250 (200T European) monofilament polyester.
SCREEN FABRIC: Mesh counts 230-280 (92T-112T European) monofilament polyester.
STENCIL: Dual-sensitized direct method photo emulsion (Optima EM-500) or SBQ presensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion.
DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jet-dry in 20 to 30 seconds at 135° to 180°F (37°C to 83°C).
MODIFICATION: To extend color and/or reduce pigmentation, add 20790 Clear Base. For printing fine details, add 20800 Halftone Base. To improve ink flow, add 1/2%-1 % (byweight) FA-011 Flow Agent. For best printing results, 20000 Series should be reduced 5-15% (by weight) with T-976B or T974. To prevent ink drying under hot &, humid conditions, add T-999 (Sparingly)
For Spraying Application,
Use T-790 Spraying Thinner
For removing misprint without surface damage, Use T-625
QUICK GUIDE FOR INK MODIFICATION
T-976B Slow Thinner : 5 -15%
T-974 Slow Thinner : 5-15%
T-999 Retarder : 2 - 3 %
FA 011 Flow Agent : 1/2 to 1%
(All mixing proportions are measured by weight.)
CLEAN UP: T-902 or T925 or SC-500 or SC-510 Wash-up.
1-quart (0.945 Liter),
1-gallon (3.78 Liter), containers.
SAFETY & HANDLING: Refer to
Material Safety Data Sheet (MSDS) for complete information.
All colors are formulated using nonleaded pigments, unless otherwise noted.
STANDARD OPAQUE COLORS
20150 Super White
20180 Opaque White
20205 Primrose Yellow
20215 Lemon Yellow
20225 Medium Yellow
20275 Ultra Orange
20305 Holiday Green
20315 Emerald Green
20325 Deep Green
20415 Brilliant Blue
20425 Orbit Blue
20435 Regal Blue
20445 Deep Peacock Blue
20515 Fire Red
20525 American Red
20535 Satellite Red
20545 Deep Red
20555 Permanent Magenta
20565 Permanent Cerise
20827 Process Blue
20834 Monastral Green
20845 Permanent Blue(R)
20846 Process Blue
20849 Permanent Violet
20853 Permanent Red(Y)
20858 Permanent Red(B)
20876 Permanent Rose Red
20886 Process Red
20900 Catalyst: Mixing Ratio-25%
20780 Metallic Base
20790 Extender Base
20800 Halftone Base
FA-011 Flow Agent
FP-084 Flattening Powder
** Special Instruction.
Mineral spirit would freeze 20000 Series